Chinese
Everyone knows that the characteristic of the screw ship unloader is that the cargo does not pollute the environment and the environment will not pollute the goods. In addition, it has the characteristics of high degree of automation and small working area. So what should the screw ship unloader need to prepare before operation? The screw ship unloader manufacturer will give you a brief introduction.
1. Before operation, it is necessary to check the moving range of the screw ship unloader and whether there are obstacles and personnel in the moving track. Check whether the anti-climbing iron wedges, wind-proof cables and wheel clamps, and anchoring devices are good and complete. It is also necessary to remove the anchoring device, anti-climbing iron wedge, and wind-proof cable to make them in a non-anchored state.
Second, when boarding the transfer shift, it is necessary to check around the screw ship unloader to check whether the main cable is twisted, injured, or loose at the fixing, etc., check the condition of the grab connector and whether the grab wire rope is worn or not. If you need to deal with it immediately, you also need to check whether the funnel system is intact.
Three, you need to check whether the wire rope and joints are loose before operation. If there is any looseness, tighten them immediately.
Okay, the preparatory work for the screw ship unloader is introduced here. If you have more questions, please consult Wuhu Jiangtai Intelligent Equipment Co., Ltd. We will serve you wholeheartedly!
